callingJitendra Kansal
↧
Re: Unable to create developer account in "SAP HANA Cloud Platform" throwing error.
↧
Re: SAP IQ 16.0 on solaris 11
Thank you Saroj for the answer.
↧
↧
FTP Error => [8140] NIECONN_BROKEN:TCP/IP Network Connection Broken in getreply()
Hi,
HELP please. I've been searching for answer to issue we've been having with FTP_CONNECT function module with no luck on a direct answer of what is causing it.
The error when running FTP_CONNECT through SE37 is: Attempt to set up connection to SFTP.xxxxx.com 22 (port) failed. (have also ran through program RSFTP002 with same error).
Have tried with both SAPFTP and SAPFTPA and both ways get the same error. Both SAPFTP and SAPFTPA are set up in SM59.
Have verified that the host, user, password and port work through filezilla.
Network people can see us going out through the firewall so we think may be issue with SAP setup but not sure.
Have turned on trace in SE59 for both SAPFTP and SAPFTPA
While running FTP_CONNECT ran program RSFTP001 to evaluate trace and can see where it says (this is while it is still processing and trying to get connected- it runs for about 2 minutes):
trc file: "dev_ftp", trc level: 2, release: '721"
sccsid: @(#) $Id: //bas/721_REL/src/krn/ftp/ftpmain.c#3 $ SAP
@(#) $Id: //bas/721_REL/src/krn/ftp/ftp.c#1 $ SAP
@(#) $Id: //bas/721_REL/src/krn/ftp/ftpcmd.c#1 $ SAP
sapftp.ini file path : G:\usr\sap\QW4\DVEBMGS00\exe\sapftp
swqsap02.wfn.int [Thr 12164] sapgw00 [Thr 12164] 79545068 [Thr 121664] CPIC_TRACE=2 [Thr 12164] IDX=3 [Thr 12164]
RFC Version 721
RFC DLL loaded
Install server functions
Call RfcAccept
Enter RfcDispatch loop
TCP/IP port: 22
Partner codepage: 4103
connect request host : SFTP.xxxxx.com, user : xxxxxxx
Connected to SFTP.xxxxx.com Port 22
- NI handle: 0
trc file: "dev_ftp", trc level:2, release: "721"
[5420] sccsid:@(#) $Id: //bas/721_REL/src/krn/ftp/ftpmain.c#3 $ SAP
@(#) $Id: //bas/721_REL/src/krn/ftp/ftp.c#1 $ SAP
@(#) $Id: //bas/721_REL/src/krn/ftp/ftpcmd.c#1 $ SAP
sapftp.ini file path : G:\usr\sap\QW4\DVEBMGS00\exe\sapftp.ini
SAPFTP passive mode set to = 0
[5420] FRP Start : argc - 6 a0 - G:\usr\sap\QW4\DVEBMGS00\exe\sapftp
xxxxxxx.xxx.int [Thr 10800] sapqw00 [Thr 10800] 79548881 [Thr 10800] CPIC_TRACE=2 [Thr 10800] IDX=2 [Thr 10800]
[5420] RFC Verion 721
[5420] RFC DLL loaded
[5420] Install server functions
[5420] Call RfcAccept
[5420] Enter RfcDispatch loop
Then once I get the error attempt to set up connection fail and re-look at the trace the following is shown
[4368] sccsid:@(#) $Id: //bas/721_REL/src/krn/ftp/ftpmain.c#3 $ SAP
@(#) $Id: //bas/721_REL/src/krn/ftp/ftp.c#1 $ SAP
@(#) $Id: //bas/721_REL/src/krn/ftp/ftpcmd.c#1 $ SAP
sapftp.ini file path: G:\usr\sap\QW4\DVEBMGS00\exe\sapftp.ini
SAPFTP passive mode set to = 0
[4368] FTP Start : argc - 6 a0 - G:\usr\sap\QW4\DVEBMGS00\exe\sapftp
xxxxxxxx.xxx.int [Thr 11880] sapqw00 [Thr 11880] 78907481 [Thr 11880] CPIC_TRACE=2 [Thr 11880 IDX=0 [Thr11880]
[4368] RFC Version 721
[4368] RFC DLL loaded
[4368] Install server functions
[4368] Call RfcAccept
[4368] Enter RfcDispatch loop
[4368] FTP Stop
[Thr 8740] *** ERROR => [8140] NIECONN_BROKEN:TCP/IP Network Connection Broken in getreply() [ftp.c 271]
[Thr 8740] FTP Stop
Is there a way before connect to turn passive mode = 1 (on)? Will that help?
Any help is appreciated as we have been researching this for days. Thank you
↧
Re: Location can not be used for TM; Type 1020 reserved for other applications.
This is a standard functionality. By default the carriers will be created as location type 1020.
This setting is maintained in ECC at:
SPRO-> Integration with other SAP components -> Advanced planning and optimization -> Application specific- settings and enhancements - Settings and enhancement for shipments -> Assign vendor account group to APO location type.
↧
Re: TalentHubEmployee. I can't choose Mobility for Employee
Also, my first problem exists in the default functionality (Talent management) on portal.
↧
↧
Re: Adding column "Posting date" into first (default) layout of MB5S transaction
In your case - over six months, since you asked a very similar question on Oct 18, 2014. Which was rejected.
↧
Re: Crystal Reports 2013 Salesforce.com Driver Encryption Protocol
Of course now that I have been able to add the new Gov Cloud database connection to our current reports and then trying to use the Set Datasource Location it will not let me Update the table instead throwing a "Data Object cannot be opened/accessed", "Unknown Database Connector Error".
Thoughts?
↧
Re: The Web Dynpro Application 'WebAdminApp' has expired.
Hi Chris,
Thanks for the feedback. Nice to know that you also found it and this solved the problem.
Regards,
Bíborka
↧
Re: There are no items to display MSS tabs
hi all ,
Issue got resolved by removing everyone role from portal .
↧
↧
How to register add-on of edited system form in sap b1 9.0?.
Hi all,
I have a problem in SAP b1 9.0.
Actually I added one field of BPCode to Employee master data, so I want to register an add-on of that system form in SAP b1 9.0.
When I create file of .ard as we watch it in video of
Creating and Registering SAP Add-on - YouTube it will be created correctly, But the problem is when I register that the file of .ard it gives error (Cannot create a file when that file already exists). Again when I create a file of .ard of any other User form it gives the same error (Cannot create a file when that file already exists).
But when I create and register the add-on of Hello World in Sample folder of SDK it will be registered correctly.
How can I solve that problem.
Anyone can help me please.
↧
Re: default contents not getting visible in portal
hi all ,
Issue got here also by removing everyone role from portal
↧
Re: Error in Transformation
Dear Ravi,
Not possible. Please go ahead with ABAP routine. It will solve your purpose.
Regards,
KK
↧
Re: Drop down menu on SNC RR over view screen
Hi Anupam,
You can insert a Drop down by selecting the place you wants to add the DD , Right click -> insert new element -> Drop down by index (or) Drop down by key , it can be inside the table tool bar also.
and later you can assign the actions to it through on_action option , write the logic whatever you want there then by the selection of the drop down value the action will be triggered automatically.
- Gowtham
↧
↧
Re: SAPPHIRE / ASUG (Orlando) questions / tips
Hi Jelana, it seems you got some very good responses and advices already.
The conference hall is the building that connects directly with The Hilton. As of the WiFi, it is always spotty. It depends on who your wireless service provider is. I have Verizon Wireless and the reception is very good. So I never have to use the conference WiFi.
Another tip I will say is to travel light. I won't carry anything bigger than my MacBook Air. Your backpack will become heavier and heavier as the time goes by. 
Hope this helps.
simon
↧
Re: How to handle SAPUI5 Cache problem?
Is there anybody who can help?
↧
Re: Bloqueo de Campos SBO_SP_TransactionNotification
Hola, se podria pero tendrias que adecuar el TN, por que este escenario esta basado en cambiar el vendedor en la factura (objtype=13).
Saludos.
Alessandro.
↧
Re: Need to show PDF output of an invoice number on click of button in WDA
Hi Manish,
No need to call any GUI class in web dynpro abap , Kindly find the following links:
http://scn.sap.com/thread/1787951
ADOBE INTERACTIVE FORMS in Web dynpro ABAP
Working with Dynamic Tables in Interactive Adobe Forms and Web Dynpro ABAP
**************** - Demo scenario on Adobe Interactive Forms using ABAP WebDynpro
- Gowtham
↧
↧
Re: Ess Mss links are not responding in overview page
hi ,
your portal and r3 shud be on same domains , kindly check this basis guy ...whether they are in both domains or not once ...like portal url shud be abc.com and r3 shud be also on same abc.com if it is in not same domain u get this problem once check that
945516 - Web Dynpro ABAP in a portal environment
go to SMICM and click on Go to > services in that check once with help of basis person and check in portal system object also how the domain name defined there once
↧
Re: Single Sign On (SSO) integration in Powerbuilder Application
Hi Ravi;
Yes, I did and I sent the WS code to you last Friday. Check your spam folder and see if it might of ended up in there.
In the mean time, I will post the code to SourceForge later today & let you know. In the worst case, you will be able to download it from SF this evening or tomorrow AM at the latest.
Regards ... Chris
↧
Re: GRID Error Invalid query tree [300-33]. The SQL error is -1
Hi Ankit Chauhan,
finally i think my code works! , I just Created a Stored Proc then Declare a Parameter on it,Then
i use this to execute my PROCEDURE
(dtto is a TEXTBOX in SDK)
sqlString &= "EXEC DFS_SP_Interest " & dtto & "" ((oForm.DataSources.DataTables.Item(0).ExecuteQuery(sqlString)
I got the idea on your comment above.Thanks for that,
My only concern is when Search for the second time, the Data that is appearing in my gridView doesnt change eventhough i change my parameter date.
sqlString &= "EXEC DFS_SP_Interest " & dtto & " "
oForm.DataSources.DataTables.Add("MyDataTable")
oForm.DataSources.DataTables.Item(0).Clear()
oForm.DataSources.DataTables.Item(0).ExecuteQuery(sqlString)
oGrid = oForm.Items.Item("MyGrid").Specific
oGrid.DataTable = oForm.DataSources.DataTables.Item("MyDataTable")
oForm.DataSources.DataTables.Item(0).Clear()
- is not working.
thanks
↧